TM-5-5420-202-20-4
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4
OCTOBER 1985
TM-5-5420-202-20-4 - Page 51 of 534
TM 5-5420-202-20-4
REAR DRAIN VALVE CONTROL LEVER ASSEMBLY REPLACEMENT (Sheet 2 of 4)
1.
Using pliers, remove cotter pin (A) from
clevis pin (B).
2.
Using pliers, remove pin (B) from clevis (C).
3.
Using hammer and 1/8 inch punch, drive pin (D)
out of lever (E).
4.
Using 7/16 inch wrench, remove two screws (F), lockwashers (G), and flat washers (H).
NOTE
It may he necessary to tap lever (E) with hammer for removal.
5.
Remove lever (E) and washer (J) from shaft (K).
6.
Remove bracket (L) from vehicle.
7.
Secure bracket (L) in vise.
8.
Using hammer and 1/8 inch punch, drive pin (M) out of control lever (N).
Go on to Sheet 3
TA248556
17-25
Back to Top
