TM-5-5420-202-20-4
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4
OCTOBER 1985
TM-5-5420-202-20-4 - Page 42 of 534
TM 5-5420-202-20-4
SLIPRING BOX ACCESS COVER REPLACEMENT (Sheet 1 of 1)
TOOLS:
9/16 in. combination box and open end wrench
Putty knife
SUPPLIES:
Gasket
Adhesive (Item 4, Appendix D)
Lockwashers (6 required)
PRELIMINARY PROCEDURE:
Remove
plate
(page 17-7)
REMOVAL:
1.
Use wrench to remove six screws (A)
and lock washers (B) securing cover (C)
and gasket (D).
2.
Remove cover (C) and gasket (D). Throw
gasket away.
3.
Using putty knife, remove all gasket
and adhesive residue.
INSTALLATION:
1.
Apply adhesive to new gasket (D).
2.
Position gasket (D) and cover (C)
with holes alined over opening in floor.
3.
Reaching through floor plate access
opening, use wrench to install six
lockwashers (B) and screws (A).
4.
Install commander’s floor plate (page 17-7).
End of Task
TA248547
17-16
Back to Top
