TM-5-5420-202-20-4
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4
OCTOBER 1985
TM-5-5420-202-20-4 - Page 35 of 534
TM 5-5420-202-20-4
STORAGE BINS AND FLASHLIGHT HOLDER REPLACEMENT (Sheet 1 of 1)
REMOVAL (Storage Bin):
TOOLS: 7/16 inch combination box and
open end wrench (2 required)
9/16 inch combination box and
open end wrench
1.
Using 9/16 inch wrench, remove four
screws (A) four lockwashers (B) and
four washers (C), from the inside Of
storage bin corners.
INSTALLATION (Storage Bin):
1.
Using fingers, install four screws (A), four lockwashers (B), and four washers (C) at the
four corners of the storage bin, finger tight.
2.
Using 9/16 inch wrench, tighten screws (A).
REMOVAL (Flashlight
Using two 7/16 inch wrenches, hold two screws (D) with
(E) and two lockwashers (F) with the other wrench.
INSTALLATION (Flashlight Holder):
one wrench and remove two nuts
Using two 7/16 inch wrenches, hold two screws (D) with one wrench and install two nuts
(E) and two lockwashers (F) with the other wrench.
End of Task
17-9
Back to Top
