TM 5-5420-202-20-4
ENGINE LOWER ACCESS COVER REPLACEMENT (Sheet 2 0f 2)
INSTALLATION
1.
Apply adhesive to new gasket (A).
2.
Position new gasket (A) and cover (B)
on bulkhead with holes (C) alined.
3.
Using socket, install eight screws (D)
and lockwashers (E) in holes (C).
4.
5.
Using socket with extension, install six
screws (F), lockwashers (G), and flat
washers (H).
Install bulkhead p to ring (page 17-15).
End of Task
17-14
TA248545