TM-5-5420-202-20-4
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4
OCTOBER 1985
TM-5-5420-202-20-4 - Page 46 of 534
TM 5-5420-202-20-4
FRONT DRAIN VALVE ASSEMBLY REPLACEMENT (Sheet 2 of 5)
2.
3.
4.
5.
6.
7.
Using prybar, pry cage (D) from bottom
of hull (E). If cage (D) will not come off,
hit knob (F) inside vehicle with hammer
until cage (D) comes out.
Using putty knife, scrape gasket (G) from
cage (D) and hull (E).
Clamp cage (D) in vise.
Using hammer and punch, drive pin (H) out
of hole in knob (F), while second person
holds spring (J) down using two screwdrivers.
Throw pin (H) away if damaged.
Remove knob (F), spring (J), and valve (K)
from cage (D).
With valve (K) in vise, using hammer and
punch, drive pin (L) out of hole in valve
(K). Throw pin (L) away if damaged.
Go on to Sheet 3
17-20
Back to Top
