TM-5-5420-202-20-4
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4
OCTOBER 1985
TM-5-5420-202-20-4 - Page 37 of 534
TM 5-5420-202-20-4
ENGINE UPPER ACCESS COVER REPLACEMENT (Sheet 1 of 2)
TOOLS:
9/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Putty knife
SUPPLIES:
Gasket
Adhesive (Item 4, Appendix D)
Lockwashers (12 required)
PRELIMINARY PROCEDURE:
Remove engine lower access cover (page 17-13)
REMOVAL:
1.
Using 9/16 inch socket, remove 12 screws (A) and lockwashers (B) securing cover (C) and
gasket (D) to bulkhead.
2.
Remove cover (C) and gasket (D). Throw gasket away.
3.
Using putty knife, scrape off all gasket and adhesive residue from cover and bulkhead.
G
O
on to Sheet 2
17-11
Back to Top
