TM 5-5420-202-20-4
BULKHEAD ACCESS COVER REPLACEMENT
TOOLS: 9/16 in. socket with 1/2in. drive
Ratchet with 1/2 in. drive
(Sheet 1 of 3)
9/16 in. combination box and open end wrench
SUPPLIES:
Gasket
Adhesive (Item 4, Appendix D)
Lockwashers (16 required)
NOTE
The following procedure is for
replacement of the right bulk-
head access cover. Replace-
ment of the left bulkhead
access cover is identical.
REMOVAL:
1.
2.
3.
Using socket and wrench, remove two
screws, nuts, lockwashers, and washers
(A) securing seat mount assembly (B) to
bracket (C).
Using socket, remove two screws,
washers, and lockwashers (D) securing
rubber bumper (E) and seat mount
assembly (B) to floor.
Remove seat mount assembly with seat
attached.
Go on to Sheet 2
17-2