TM 5-5420-202-20-4
COMMANDER’S FLOOR PLATE REPLACEMENT
(Sheet 1 of 1)
TOOLS:
7/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
SUPPLIES:
Lockwashers (8 required)
REFERENCE:
TM 5-5420-228-24
PRELIMINARY PROCEDURES:
Remove commander’s seat (page 17-56)
Remove commander’s periscope stowage
(TM 5-5420-228-24)
box
securing two plates (D)
2.
Remove two plates (D)
INSTALLATION:
1.
Place two plates (D) in
floor.
REMOVAL:
1.
Using socket, remove eight screws (A),
lockwashers (B), and flat washers (C)
to hull floor.
from hull floor.
position on hull
2.
Using socket, install eight screws (A),
lockwashers (B), and flat washers (C)
securing two plates (D) to hull floor.
3.
Install commander’s seat (page 17-57).
4.
Install commander’s periscope
box (TM 5-5420-228-24).
stowage
End of Task
17-7