TM-5-5420-202-20-4
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4
OCTOBER 1985
TM-5-5420-202-20-4 - Page 68 of 534
TM 5-5420-202-20-4
REAR DRAIN VALVE LINKAGE ADJUSTMENT (Sheet 3 of 7)
9.
10.
11.
12.
13.
Adjust clevis (C) and jamnut (G) until one
inch of threads can be measured on rod (H).
Using wrench, tighten jamnut (G) while
holding clevis (C) with pliers.
Turn rod (H) by hand until holes in clevis (C)
and hole in lever (E) can be lined up
using clevis pin (B).
Using fingers, push clevis pin (B) through
holes in clevis (C) and hole in lever (E).
Using wrench, tighten rear coupling jamnut (J)
while holding coupling (K) with another
wrench.
Go on to Sheet 4
TA248573
17-42
Back to Top
