TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 266 of 750

TM 5-5420-228-24

HEU ZERO HYDRAULIC PRESSURE (Sheet 1 of 1)

SUPPLIES;

Rags (Item 12, Appendix D)

Shield (Item 33, Appendix D)

Gloves (Item 27, Appendix D)

Goggles (Item 26, Appendix D)

PROCEDURE

1.

Ensure engine is not running.

2.

Position ball valve lever (A) to UNLOAD position.

3.

Pull up then push down each hydraulic lever (B) three times

WARNING

x

FRH hydraulic fluid may contain Tricresyl Phosphate which, if taken internally,

can produce paralysis. Hydraulic fluid may be absorbed through the skin. Wear

long sleeves, gloves, goggles, and face shield. If FRH get in eyes, wash them

immediately and get medical aid immediately. If FRH gets on skin, wash

thoroughly prior to eating or smoking.

Application of these measures is

considered an effective control of the hazard.

x

Serious injury could result from high pressure hydraulic fluid spray, If this

procedure is not followed when disconnecting any hydraulic lines or fittings.

4.

If a hydraulic line is to be disconnected, wrap affected fitting with a rag before disconnecting.

End of Task

Change 3

3-70.5/(3-70.6 blank)