TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 257 of 750

TM 5-5420-228-24

HYDRAULIC CLUTCH ADJUSTMENT (Sheet 1 of 1)

SUPPLIES:

Lockwire

REFERENCE: TM 5-5420-202-10

PRELIMINARY PROCEDURE:

Remove pump-clutch cover plate (page 3-65).

ADJUSTMENT:

1.

2.

3.

4.

5.

6.

7.

8.

9.

Push clutch control lever (A) downward to disengage.

Turn clutch manually until pin (B) can be reached.

Pull pin (B) out and lock by inserting lockwire through hole in pin (B).

Turn cover (C) clockwise one or two adjusting holes (D).

Pull clutch control lever (A) up to engage.

Repeat steps 4 and 5 until clutch control lever (A) requires definite force to engage clutch.

Remove lockwire from pin (B) and push pin in.

Install pump-clutch cover (page 3-65)

Operate pump-clutch to insure proper operation (TM 5-5420-202-10).

TA251466

End of Task

3-66