TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 250 of 750

TM 5-5420-228-24

PUMP DRIVE SHAFT UNIVERSAL JOINT REPLACEMENT AND REPAIR (Sheet 1 of 5)

PROCEDURE INDEX

Procedures

Page

Removal

3-64.1

Disassembly

3-64.3

Assembly

3-64.3

Installation

3-64.4

TOOLS: Torque wrench 3/8 inch drive (0-600 lb.-in )

½ in. combination box and open end wrench

9/16 in. socket and ratchet

Pliers

Vise

7/32-in. socket head screw key (allen wrench)

SPECIAL TOOLS: ½ in. crowfoot wrench with 3/8 in. drive

SUPPLIES:

Universal joint parts kit.

Dry cleaning solvent (Item 15, Appendix D)

Gloves (Item 27, Appendix D)

Masking tape (Item 18 Appendix D)

Grease (Item 9 Appendix D)

PRELIMINARY PROCEDURE: Remove universal joint cover (page 3-61)

REMOVAL:

1.

Using ½ inch wrench, remove four screws (A)

and four washers (B), two clamps (C) from

PTO yoke (D).

Go on to Sheet 2

Change 3

3-64.1

C

D

B

A