TM-5-5420-228-24
LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL
AUGUST 1985
TM-5-5420-228-24 - Page 285 of 750
TM 5-5420-228-24
SCISSOR CYLINDER RELIEF VALVE (RV8) CARTRIDGE REPLACEMENT (Sheet 1 of 1)
TOOLS:
1-1/8 in. open end wrench
SUPPLIES:
Rags (Item 12, Appendix D)
Preformed packing
PRELIMINARY PROCEDURE:
Relieve hydraulic pressure (page 3-71).
REMOVAL:
NOTE
Use rags to catch excess hydraulic fluid.
1.
Using wrench, remove cartridge (A)
from relief valve (B).
2.
Remove preformed packing (C) from
cartridge (A). Throw preformed
packing (C) away.
INSTALLATION:
1.
Install new preformed packing (C)
on cartridge (A).
2.
Using wrench, install cartridge (A) in
relief valve (B).
3.
Adjust relief valve pressure (page 3-89).
End of Task
TA251486
3-88
Back to Top
