TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 391 of 750

TM 5-5420-228-24

RESERVOIR-TO-PUMP HOSE ASSEMBLY (CV5) REPLACEMENT (Sheet 1 of 3)

TOOLS:

7/8 in. open end wrench

1-1/8 in. open end wrench

1-7/16 in. open end wrench

1-3/4 in. open end wrench

12 in. adjustable wrench

SUPPLIES:

Pipe tape (Item 19, Appendix D)

Drip pans (suit able containers)

Rags (Item 12, Appendix D)

Masking tape (Item 18, Appendix D)

Pencil (Item 22, Appendix D)

REFERENCE:

LO 5-5420-202-12

PRELIMINARY PROCEDURE:

Drain hydraulic reservoir

REMOVAL:

NOTE

Use drip pan and rags to

fluid trapped in lines. Use

tag lines for installation.

catch hydraulic

masking tape to

(page

3-74)

1.

Using 7/8 inch wrench, disconnect hose

assembly “CV5” (A) from elbow (B).

2.

Using 1-1/8 inch wrench to hold bushing (C), use adjustable wrench to remove elbow

(B) and collar (D).

3.

Using 1-7/16 inch wrench to hold check valve (E), use 1-1/8 inch wrench to remove bushing

(c).

4.

Using 1-7/16 inch wrench, remove check valve (E).

5.

Using 1-3/4 inch wrench to hold bushing (F), use adjustable wrench to remove elbow

(G).

Go

on to Sheet

2

TA251590

3-194