TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

  TM-5-5420-228-24 - Page 393 of 750

TM 5-5420-228-24
RESERVOIR-TO-PUMP HOSE ASSEMBLY (CV5) REPLACEMENT (Sheet 3 of 3)
4.
Using 1-3/4 inch wrench, install bushing (E).
5.
Using 1-3/4 inch wrench to hold bushing
(E), use adjustable wrench to install
elbow (F).
BASE OF RESERVOIR
6.
7.
8.
9.
10.
11.
12.
13.
Using 1-7/16 inch wrench, install check valve (G) with flow arrow pointing to elbow (F).
Using 1-7/16 inch wrench to hold check valve (G), use 1-1/8 inch wrench to install bushing
(H).
Using 1-1/8 inch wrench to hold bushing (H), use adjustable wrench to install elbow (J)
and collar (K).
Using 7/8 inch wrench, install hose assembly “CV5” (D).
Service hydraulic reservoir (LO 5-5420-202-12).
Bleed hydraulic system (page 3-72).
Check for hydraulic leaks and correct as necessary.
Service hydraulic reservoir (LO 5-5420-202-12).
End of Task
TA251592
3-196


Back to Top