TM-9-1240-401-34-P

TELESCOPE MOUNT M146: M118A2 AND M118A3; TELESCOPE MOUNT M145: M145A1; PANORAMIC TELESCOPE: M117 AND M117A2; FIRE CONTROL QUADRANT: M15; PERISCOPE: M42

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1993
TM-9-1240-401-34-P

  TM-9-1240-401-34-P - Page 355 of 590

TM 9-1240-401-34&P
Application/Explanation
Recoverability
Codes
Z
O
F
H
D
L
A
-Nonreparable item. When unserviceable, condemn and dispose of the item at the level of maintenance shown
in 3d position of SMR Code.
-Reparable item. When uneconomically reparable, condemn and dispose of the item at unit or aviation unit
level.
-Reparable item. When uneconomically reparable, condemn and dispose of the item at the direct support or
aviation intermediate level.
-Reparable item. When uneconomically reparable, condemn and dispose of the item at the general support
level.
-Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal of
item not authorized below depot level.
-Reparable item. Condemnation and disposal not authorized below specialized repair activity (SRA).
-Item requires special handling or condemnation procedures because of specific reasons (e.g., precious metal
content, high dollar value, critical material, or hazardous material). Refer to appropriate manuals/directives for
specific instructions.
c.
NSN (Column (3)). The national stock number for the item is listed in this column.
d.
CAGEC (Column (4)). The Contractor and Government Entity Code (CAGEC) is a 5-digit numeric code which is used to identify
the manufacturer, distributor, or Government agency, etc., that supplies the item.
e. Part Number (Column (5)). Indicates the primary number used by the manufacturer (individual, company, firm, corporation, or
Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications
standards, and inspection requirements to identify an item or range of items.
NOTE
When you use an NSN to requisition an item, the item you receive may have a different part number from the part
ordered.
f.
DESCRIPTION AND USABLE ON CODE (UOC) (Column (6)). This column includes the following information:
(1)
The Federal item name and, when required, a minimum description to identify the item.
(2)
Items that are included in kits and sets are listed below the name of the kit or set.
(3)
Spare/repair parts that make up an assembled item are listed immediately following the assembled item line
entry.
Change 1 D-5


Back to Top