TM-9-1240-401-34-P
TELESCOPE MOUNT M146: M118A2 AND M118A3; TELESCOPE MOUNT M145: M145A1; PANORAMIC TELESCOPE: M117 AND M117A2; FIRE CONTROL QUADRANT: M15; PERISCOPE: M42
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
JULY 1993
TM-9-1240-401-34-P - Page 357 of 590
TM 9-1240-401-34&P
(4)
FIG. Column. The column lists the number of the figure where the item is identified/located in Sections II and III.
(5)
ITEM Column. The item number is that number assigned to the item as it appears in the figure referenced in the
adjacent figure number column.
5.
Special Information.
a. Usable on Code. The usable on code appears in the lower left comer of the Description column heading. Usable on codes are
shown as “UOC:.
.. ’ in the Description Column (justified left) on the first line applicable item description/nomenclature. Uncoded items
are applicable to all models. Identification of the usable on codes used in the RPSTL are:
Code
Used On
L96
L95
V46
L98
V36
U38
L97
762
L99
M146 telescope mount
M118A2 elbow telescope
M116A3 elbow telescope
M145 telescope mount
M145A1 telescope mount
M117 panoramic telescope
M117A2 panoramic telescope
M42 periscope
M15 fire control quadrant
b. Fabrication Instructions. Bulk materials required to manufacture items are listed in the bulk material functional group of this
RPSTL. Part numbers for bulk materials are also referenced in the description column of the line item entry for the item to be
manufactured/fabricated. Detailed fabrication instructions for items source-coded to be manufactured or fabricated are found in appendix
C.
c. Assemblv Instructions. Detailed assembly instructions for items source-coded to be assembled from component spare/repair
parts are found in TM 9-2350-311-20-2 and TM 9-2350-311-34-2. Items that make up the assembly are listed immediately following the
assembly item entry or reference is made to an applicable figure.
d. Kits Line item entries for repair parts kits appear in their applicable figure in item number sequence. The statement ‘Part of Kit
P/N’ with the applicable part number will follow the item name.
e.
Index Numbers. Items which have the work BULK in the figure column will have an index number shown in the item number
column. This index number is a cross-reference between the National Stock Number/Part Number index and the bulk material list in
Section II.
Change 1 D-7
Back to Top
