TM-9-1290-365-24-P
PALADIN MUZZLE VELOCITY SYSTEM M93 UPGRADED
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
OCTOBER 2000
TM-9-1290-365-24-P - Page 40 of 334
ARMY TM 9-1290-365-24&P
1.20 MECHANICAL CONSTRUCTION.
The transceiver unit consists of the following assemblies:
a. RF section assembly.
b. Back cover assembly
1.1.20.1 RF Section
. For the following description, refer to Figure 1-7. The RF section assembly
accommodates all RF components (microstrip antenna, transceiver and RF cable which
connects between them), the Doppler amplifier, and the power supply. The Doppler amplifier
and the power supply are covered with special covers for EMI protection. A silicone rubber
gasket seal is positioned between the RF section and the back cover.
1.1.20.2
Back Cover Assembly
. For the following description, refer to Figure 1-8. The back
cover assembly accommodates the interface connector, the EMI filter module, and the MVP The
connector is protected with a dust cap. Six captive screws fasten the back cover to the RF
section. The back cover is recessed at the connector area in a way that provides a handle for
easy carrying and contains four mounting holes for mechanical mounting on the mounting
bracket.
1-20
Back to Top
