TM-9-2320-209-10-2
2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; SCHEDULED MAINTENANCE; OPERATOR LEVEL
SEPTEMBER 1980
TM-9-2320-209-10-2 - Page 29 of 69
TM9-2320-209-10-2/TO36A12-1B-1091-2
Table 1-1. Operator/Crew Preventive Maintenance Checks and Services - Cont
NOTE :
These checks are to be made in the order listed, within designated interval.
B-Before operation
A-After operation M-Monthly
D-During operation
W-Weekly
Interval
Item
Item to be Inspected
Equipment is
No.
Procedure: Check for and have repaired, filled,
not ready/
B
D
A
w
M
or adjusted as needed
available if
16
STEERING SYSTEM
●
Check for unusual free play, binding,
Loose or binding
wander, or shimmy.
steering action,
steering
inoperative.
17
TRANSMISSION
●
Shift transmission in all ranges observing Transmission is
any unusual stiffness or binding of shifting inoperative.
linkage.
18
CLUTCH
●
Check for drag, noise, chatter, grab,
Clutch is in-
slippage, and clashing of gears.
operative, slip-
ping, or has
definite grab or
chatter.
19
TRANSFER
●
Check shifting operation for unusual
Transfer is
noises, stiffness, or jumping out of gear. inoperative.
20
HORNS
●
Check for operation if tactical situation
permits.
21
●
FRONTAND REAR DRIVE AXLES AND
PROPELLER SHAFTS
Listen for unusual noises or vibrations. Unusual noises
Vibrations, clicking, or clunking noises or vibrations
indicate worn U-joints or damaged propeller evident.
shafts.
1-13
Back to Top
