TM 9-2320-209-20-3-1
1.
Put hose (1) on elbow (2).
2.
Slide two clamps (3) on hose (1) and elbow (2).
3.
Put hose (1) and elbow (2) in place as shown.
4.
Using 1/2-inch socket wrench with 10-inch extension, screw on and tighten
four nuts (4).
5.
Using screwdriver, tighten two clamps (3).
NOTE
Follow-on Maintenance Action Required:
Close hood and right side panel. Refer to TM 9-2320-209-10.
END OF TASK
TA 08220 2
6-30