TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 408 of 830

TM 9-2320-209-20-3-1

FRAME 3

1.

Using spring scale (l), pull upper end of bar (2) with force of 50 pounds and using

9/16-inch wrench, tighten capscrew (3). Take

out bar.

2.

Push on belts (4) at point midway between coolant pump pulley (5) and generator

pulley (6). Belt should give about 3/4-inch at this point.

NOTE

Follow-on Maintenance Action Required:

Close hood. Refer to TM 9-2320-209-10.

END OF TASK

TA 04764 0

6-48