TM 9-2320-209-20-3-1
d. Flushing.
1.
Using screwdriver, loosen two screws (1) on two clamps (2). Spread both
clamps and take clamps off preformed hose (3).
2.
Using 9/16-inch wrenches, unscrew and take off nut (4) from bolt (5). Pull
bolt out of rod end clevis (6).
3.
Pull top of radiator (7) forward just enough to take off preformed hose (3).
GO TO FRAME 2
TA 08680 2
6-54