TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981
TM-9-2320-209-20-3-1

  TM-9-2320-209-20-3-1 - Page 423 of 830

TM 9-2320-209-20-3-1
1.
Make sure surface of intake manifold flange (1) is clean. Put gasket (2) on
flange.
2.
Hold thermostat housing (3) in engine compartment as shown.
3.
Join hose (4) to thermostat housing (3), but do not tighten clamp (5).
4.
Put thermostat housing (3) against intake manifold flange (1). Make sure
lip (6) of thermostat housing seats in recess (7) of intake manifold flange.
GO TO FRAME 11
TA 047023
6-63


Back to Top