TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 496 of 830

TM 9-2320-209-20-3-1

FRAME 2

1.

2.

3.

GO

NOTE

Some starters may be at angle for mounting of left

side of engine.

Check that position of starter flange to center line of solenoid is as shown. If

position is not as shown, do steps 2 and 3. If position is as shown, go to

frame 3.

Using 3/16-inch allen wrench, unscrew and take out six bolts (1).

Turn starter flange (2) on starter housing (3), using solenoid centerline (4)

as guide, until it is in position shown.

Using 3/16-inch allen wrench, screw

in and tighten six bolts (1).

TO FRAME 3

TA 047097

7-60