TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 490 of 830

TM 9-2320-209-20-3-1

7-11.

ENGINE STARTER REMOVAL AND REPLACEMENT (TRUCKS WITH PUSH-

BUTTON STARTER SWITCH).

TOOLS:

3/4-inch socket wrench 7/16-inch wrench

15/16-inch open end wrench

3/8-inch wrench

3/16-inch sockethead screw key

Flat-tip screwdriver

(Allen wrench or equivalent)

SUPPLIES:

Starter gasket

Starter adapter gasket

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

Tags

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Disconnect battery ground cable. Refer to para 7-58.

(2) Remove intake air cleaner. Refer to para 4-3.

b.

Removal.

FRAME 1

NOTE

Truck may have either of two types of starters.

1.

Check whether starter is type A or type B.

IF STARTER IS TYPE A, GO TO FRAME 2.

IF STARTER IS TYPE B, GO TO FRAME 3

7-54