TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 480 of 830

TM 9-2320-209-20-3-1

d.

Adjustment.

FRAME 1

1.

Using 1/2-inch wrench,

loosen locknut (1) and screw adjusting bolt (2) all the

way in as shown.

2.

Using C-clamp, compress switch return spring (3) to close starter switch (4)

as shown.

CAUTION

In step 3 do not pull lever any further forward than

shown.

This could damage spring inside of starter.

3.

Move lever (5)

4.

Move lever (5)

out binding.

forward in direction shown, until it is almost vertical.

back and forth a few times. The lever should move freely with-

NOTE

If lever does not move freely, take out starter and tell

direct support maintenance. Refer to para 7-10.

GO TO FRAME 2

7-44