TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 485 of 830

TM 9-2320-209-20-3-1

FRAME 2

1.

Using 15/16-inch wrench,

unscrew and take off three nuts (1) and three

lockwashers (2).

2.

Pull starter (3) straight out of flywheel housing (4) until starter drive gear

is free.

3.

Take out starter (3).

4.

Check that teeth of starter drive gear on end of starter (3) are not damaged.

If teeth are damaged, tell direct support maintenance.

GO TO FRAME 3

7-49