TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 477 of 830

TM 9-2320-209-20-3-1

7-8.

STARTER SWITCH REMOVAL, REPLACEMENT AND ADJUSTMENT (TRUCKS

WITH PEDAL STARTER).

TOOLS:

5/8-inch box wrench

1/2-inch wrench

Flat-tip screwdriver

C-clamp

SUPPLIES:

Tags

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Remove air cleaner filter element. Refer to TM 9-2320-209-10.

(2) Disconnect battery ground cable. Refer to para 7-58.

NOTE

When taking electrical cables off posts, always

tag cables so they will be put back on right post.

b.

Removal.

FRAME 1

1.

Using 5/8-inch wrench,

unscrew and take off two nuts and washers (1).

2.

Lift cables (2 and 3) off starter switch (5).

3.

Using screwdriver,

unscrew and take out four screws with lockwashers (4).

4.

Lift off starter switch (5).

END OF TASK

TA 047153

7-41