TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 472 of 830

TM 9-2320-209-20-3-1

b.

Removal.

NOTE

When taking electrical cables off posts, always

tag cables so they will be put back on correct

post .

On trucks with LD series engines, magnetic

switch mounting bracket is mounted on engine.

Trucks with LDS series engine have bracket

mounted on exhaust support bracket as shown.

FRAME 1

1.

Using 7/16-inch wrench,

unscrew and take off two nuts and lockwashers (1).

2.

Pull out magnetic starter switch (2).

3.

Using 3/8-inch wrench,

unscrew and take off nut (3) and take off cable (4).

4.

Using 5/8-inch wrench, unscrew two nuts (5) and take off cables (6 and 7).

Take magnetic starter switch (2) from truck.

NOTE

Trucks with pedal starter have only one cable (7).

GO TO FRAME 2

7-36