TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 465 of 830

TM 9-2320-209-20-3-1

Section III.

STARTING SYSTEM

7-6.

STARTER PEDAL AND LINKAGE ASSEMBLY REMOVAL, REPAIR, AND

REPLACEMENT.

TOOLS :

7/16-inch

7/16-inch

SUPPLIES:

None

PERSONNEL: T

WO

socket wrench

open end wrench

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Open hood and side panels. Refer to TM 9-2320-209-10.

(2) Disconnect battery ground cable. Refer to para 7-58.

b.

Removal.

FRAME 1

Soldier A

1. Using 7/16-inch wrench, hold four bolts (1) while soldier B

unscrews locknuts (2).

Soldier B

2. Using 7/16-inch wrench, unscrew and take off four locknuts (2)

and take off mounting plate (3).

Soldier A

3. Take out four bolts (1) and lift off pedal assembly (4).

4.

Using 7/16-inch wrench, hold two bolts (5) while soldier B

unscrews locknuts (6).

Soldier B

5. Using 7/16-inch wrench, unscrew and take off two locknuts (6).

Soldier A

6. Take out two bolts (5).

GO TO FRAME 2

7-29