TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 455 of 830

TM 9-2320-209-20-3-1

FRAME 6

1.

Using mechanical puller (1), set adjustable puller arms (2) over rear edge of

alternator pulley (3) as shown.

2.

Screw puller bolt (4) in until it presses against alternator shaft (5) as shown.

3.

Using 3/4-inch wrench,

slowly tighten puller bolt (4) until alternator pulley

(3) is loose on shaft (5).

Pulley will move in direction shown.

4.

Take puller (1) off alternator pulley (3) and slide pulley off end of shaft (5).

5.

Tape key (6) to shaft (5) so it will not be lost.

END OF TASK

7-19