TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 461 of 830

TM 9-2320-209-20-3-1

FRAME 6

CAUTION

Be careful when putting positive cable terminal lug (1)

on terminal (2). This cable goes to the battery. The

lug is larger and more rounded on one side. This side

must go up.

Putting lug on the wrong way could short

1.

2.

3.

out the alternator and damage it.

Put positive cable terminal lug (1) on terminal (2) as shown.

(3) on terminal and screw on nut (4). Using torque wrench,

45 to 55 pound-inches.

Put ground cable terminal lug (5) over hole in terminal block

Put lockwasher (7) on bolt (8) and put bolt through terminal

Put lockwasher

tighten nut to

(6) as shown.

lug.

Screw bolt (8) into terminal block (6), and using torque wrench, tighten bolt

to 82 to 102 pound-inches.

GO TO FRAME 7

7-25