TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 463 of 830

TM 9-2320-209-20-3-1

7-5. GENERATOR REGULATOR REMOVAL AND REPLACEMENT.

TOOLS:

1/2-inch open end wrench

Adjustable spanner wrench, 3/4-inch to 2-inch

SUPPLIES:

None

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Open hood and left side panel. Refer to TM 9-2320-209-10.

(2) Disconnect battery ground cable. Refer to para 7-58.

b.

Removal.

FRAME 1

1.

Using adjustable spanner wrench,

unscrew and take off generator cable

connector (1) and chassis wiring connector (2) from generator regulator

NOTE

Put protective caps over ends of the two cable connectors

(1 and 2) and two receptacles on the regulator.

2.

Using 1/2-inch wrench,

unscrew and take off four nuts and lockwashers

3.

Take generator regulator (3) off shock mount assembly (5).

END OF TASK

(3).

(4).

7-27