TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 462 of 830

TM 9-2320-209-20-3-1

FRAME 7

1.

2.

3.

4.

5.

6.

Put hold down clamp (1) on block (2) and aline holes.

Put in two screws and lockwashers (3). Using flat-tip screwdriver, tighten

screws.

Seal terminal cover (4) and base (5) with silicone compound.

Put terminal cover (4) on base (5).

Put on two screws and lockwashers (6). Using screwdriver, tighten screws.

Join plug (7) to connector (8).

NOTE

Follow-on Maintenance Action Required:

1. Reconnect battery ground cable. Refer to para 7-58.

2. Adjust fan belt tension. Refer to para 6-9.

3. Start engine and check that battery-generator indi-

cator is in green area. Stop engine. Refer to

TM 9-2320-209-10.

4. Close hood and side panels. Refer to TM 9-2320-

209-10.

END OF TASK

7-26