TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 456 of 830

TM 9-2320-209-20-3-1

c.

Replacement.

FRAME 1

1.

2.

3.

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame. Keep a fire extinguisher nearby when

solvent is used. Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

NOTE

If key (1) is taped on shaft, take off tape. Clean

key and shaft with solvent, then put key in slot.

Put key (1) in slot (2).

Line up keyway (3) in pulley (4) with key (1) in shaft (5). Put pulley on

shaft and press it on firmly.

Put flat washer (6) on shaft and screw on locknut (7) finger tight.

GO TO FRAME 2

7-20