TM-9-2320-209-20-3-1

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 1 OF 4

MAY 1981

TM-9-2320-209-20-3-1 - Page 446 of 830

TM 9-2320-209-20-3-1

FRAME 5

1.

2.

3.

Push generator (1) toward engine and slip two V-belts (2) around pulley (3).

NOTE

Do not hook up electrical connector to generator at this

time.

Polarization procedure must be done first.

Put lockwasher (4) and key washer (5) on bolt (6).

Put bolt (6) through adjustment bracket (7), and screw bolt into generator

flange (8) finger tight.

NOTE

Bolt (6) is not tightened until fan belt adjustment has

been done.

NOTE

Follow-on Maintenance Action Required:

1.

Adjust fan belt. Refer to para 6-9.

2.

Do polarization procedure. Refer to para 7-3d.

3.

Start engine and check that battery-generator

indicator is in the green area. Stop engine.

Refer to TM 9-2320-209-10.

4.

Close hood and right side panel. Refer to

TM 9-2320-209-10.

END OF TASK

7-10