TM 9-2320-209-20-3- 2
FRAME 3
1 .
Put bumper (1) and brake pedal lever (2) onto brake pedal (3) .
2 .
Using 9/16-inch wrench , screw in and tighten washer (4) and screw (5) .
3 .
Put rod yoke (6) into place and aline hole in rod yoke with holes in brak e
pedal lever (2) .
Put in clevis pin (7) .
4 .
Using pliers, put cotter pin (8) into inner hole and bend open ends o f
cotter pin .
GO TO FRAME 4
13-14 1