TM 9-2320-209-20-3- 2
1 .
Put clutch control rod yoke (1) on clutch control lever (2) and aline holes .
2 .
Using 3/4-inch wrenches, put in and hold screw (3) and screw on an d
tighten nut (4) .
3 .
Using pliers , hook brake pedal return spring (5) into clevis pin (6) .
4 .
Using pliers , hook clutch return spring (7) onto clutch control lever (2) .
NOT E
Follow-on Maintenance Action Required :
For trucks with power takeoff, tell direct suppor t
maintenance to replace power takeoff .
END OF TAS K
13-14 3