TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 169 of 552

TM 9-2320-209-20-3- 2

c .

Replacement .

(1) Air lines and clamps .

CAUTIO N

Fittings are made of soft brass. They can b e

stripped if tightened too much. Tighten fitting s

just enough to stop air from leaking .

NOT E

The air valve supply line at left rear of chassi s

on truck M275A2 is used for this typical task .

1 .

Put air tube (1) in place as shown .

2 .

Using 3/4-inch combination box and open end box wrench, hold tee fitting (2) .

3 .

Using 13/16-inch combination box and open end box wrench, screw on an d

tighten tube nut (3) .

4 .

Using 7/8-inch combination box and open end box wrench, screw on an d

tighten tube nut (4) .

GO TO FRAME 2

13-15 6