TM-9-2320-209-20-3-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4
MAY 1981
TM-9-2320-209-20-3-2 - Page 170 of 552
TM 9-2320-209-20-3- 2
FRAME 2
1 .
2 .
3 .
Put tube clamp (1) on air tube (2) .
NOT E
There may be an electrical harness clamp (3). If ther e
is, put harness clamp on capscrew (4) before screwin g
on nut (5) .
Using 9/16-inch wrench, put through and hold capscrew (4). Using 1/2-inc h
drive ratchet and 9/16-inch socket, screw on and tighten nut (5) .
Do steps 1 and 2 again for other three tube clamps (1) .
NOT E
Follow-on Maintenance Action Required :
1 .
Start engine and let it run until air pressure gage read s
between 65 and 125 psi .
Refer to TM 9-2320-209-10 .
2 .
Stop engine .
Refer to TM 9-2320-209-10 .
3 .
Do air system leak test .
Refer to Part 1, para 1-5 .
END OF TAS K
13-15 7
Back to Top
