TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 265 of 552

TM 9-2320-209-20-3- 2

b .

Removal .

NOT E

Air compressor pn M5407B has a tapered shaf t

with no key .

Air compressor pn M5408D has a

straight shaft with a key .

1 .

Open hood .

Refer to TM 9-2320-209-10 .

2 .

Using air compressor pulley wrench, hold pulley flange (1). Using 1 1/8 -

inch socket wrench, unscrew nut (2) .

3 .

Using 9/16-inch socket wrench, loosen screws (3 and 4) until lockwasher s

(5 and 6) do not hold .

4 .

Using air compressor pulley wrench, unscrew pulley flange (1) until driv e

belt (7) is loose enough to take off. Take drive belt off pulley (8) .

5 .

Using pulley puller, pull pulley (8) off shaft of compressor (9) .

GO TO FRAME 2

13-25 2