TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 273 of 552

TM 9-2320-209-20-3- 2

13-35. AIR COMPRESSOR GOVERNOR ASSEMBLY REMOVAL AND REPLACEMENT .

TOOLS :

7/16-inch wrenc h

9/16-inch wrenc h

5/8-inch wrenc h

1/2-inch socket wrenc h

5-inch extensio n

Adjustable wrenc h

3/16-inch sockethead screw ke y

SUPPLIES: Non e

PERSONNEL: On e

EQUIPMENT CONDITION: Truck parked ,

a .

Preliminary Procedures .

(1) Open hood and right side panel .

(Allen wrench or equivalent )

engine off, handbrake set .

Refer to TM 9-2320-209-10 .

(2) Vent air system. Refer to para 13-20 .

b .

Removal .

1 .

Using 5/8-inch wrench, unscrew and take off two tube nuts (1) .

2 .

Using 9/16-inch wrench, unscrew and take off tube nut (2) .

3 .

Using 1/2-inch socket wrench and 5-inch extension, unscrew and take ou t

two capscrews (3) and lockwashers (4) .

4 .

Take off air compressor governor valve (5) .

GO TO FRAME 2

13-26 0