TM-9-2320-209-20-3-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4
MAY 1981
TM-9-2320-209-20-3-2 - Page 277 of 552
TM 9-2320-209-20-3- 2
13-36. AIR COMPRESSOR GOVERNOR PRESSURE CHECK AND ADJUSTMENT .
TOOLS :
1 1/16-inch wrenc h
13/16-inch wrenc h
SUPPLIES :
Non e
PERSONNEL:
T
W
O
EQUIPMENT CONDITION :
Truck parked, engine off, handbrake set .
a .
Pressure Check .
FRAME 1
1 .
Start engine and bring it to normal operating temperature. Refer t o
TM 9-2320-209-10 .
2 .
Air pressure gage (1) reading should be l00 to 105 psi .
3 .
If air pressure gage (1) reading is correct, shut off engine. Refer t o
TM 9-2320-209-10 .
4 .
If air pressure gage (1) is too high, stop engine. Refer to TM 9-2320-209-10 .
Do adjustment .
Refer to para 13-36b .
5 .
If air pressure gage (1) reading is too low, stop engine. Refer t o
TM 9-2320-209-10. Do adjustment. Refer to para 13-36c .
END OF TAS K
13-26 4
Back to Top
