TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 282 of 552

TM 9-2320-209-20-3- 2

13-38 .

QUICK-DISCONNECT COUPLING HALF REPAIR .

NOT E

Repair of quick-disconnect coupling half i s

limited to replacement of seal. It is no t

necessary to remove quick-disconnect couplin g

half from truck or hose to replace seal .

TOOLS :

Flat-tip screwdrive r

SUPPLIES :

Sea l

PERSONNEL: On e

EQUIPMENT CONDITION :

Truck parked, engine off, handbrake set .

WARNIN G

Be careful when taking out seal (1), not to cut hand s

with screwdriver .

1 .

Using screwdriver, pry seal (1) on outer edge of coupling half (2). B e

careful not to break seal .

If seal breaks, make sure to get all of the piece s

out .

2 .

Throw away damaged seal (1) .

3 .

Put new seal (1) into place .

END OF TAS K

13-26 9