TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 271 of 552

TM 9-2320-209-20-3- 2

13-34. AIR COMPRESSOR DRIVE BELT REMOVAL, REPLACEMENT, AN D

ADJUSTMENT .

TOOLS :

9/16-inch socket wrenc h

10-inch extensio n

24-inch adjustabl e

Air compressor pulley adjusting wrench, pn 1093528 8

Straight edg e

Rule r

SUPPLIES :

Non e

PERSONNEL: On e

EQUIPMENT CONDITION :

Truck parked, engine off, handbrake set .

a .

Preliminary Procedure. Remove fan drive belts. Refer to Part 1, para 6-9 .

b .

Removal .

1 .

Using socket wrench, unscrew and take out two capscrews (1) .

2 .

Using air compressor pulley adjusting wrench (2), turn adjusting flange (3 )

to the left .

3 .

Take off air compressor drive belt (4) from air compressor pulley (5) an d

crankshaft pulley (6) .

END OF TAS K

13-25 8