TM 9-2320-209-20-3- 2
(2) Cleaning, inspection, and repair .
WARNIN G
Do not use a wire brush or compressed air t o
clean brake drum (1) .
There may be asbesto s
dust on the drums which can be dangerous t o
your health .
Dry cleaning solvent is flammable. Do not us e
near an open flame .
Keep a fire extinguishe r
nearby when solvent is used. Use only in well -
ventilated places .
Failure to do this may resul t
in injury to personnel and damage to equipment .
1 .
Clean drum with a brush and water .
2 .
Clean face (2) of drum (1) with solvent and let it dry .
3 .
Check that drum (1) is not cracked .
If drum is cracked, throw it away an d
get a new one .
4 .
Check that face (2) of drum (1) is not scored as shown. If drum is scored ,
tell direct support maintenance .
GO TO FRAME 2
14-2 8