TM-9-2320-209-20-3-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4

MAY 1981

TM-9-2320-209-20-3-2 - Page 319 of 552

TM 9-2320-209-20-3-2

14-5. FRONT AND REAR HUB AND BRAKE DRUM ASSEMBLY REPAIR.

TOOLS :

5/8-inch wrenc h

Arbor pres s

Brass hammer, medium

Medium ballpeen hammer

Wood blocks, 4 X 4 X 18

Brass drif t

inches (2 )

SUPPLIES:

Dry cleaning solvent, type II (SD-2), Fed. Spec P-D-680

PERSONNEL: T

W O

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set .

a .

Preliminary Procedure .

Remove hub and drum assembly. Refer to para

14-4 for front hub and drum assembly removal.

Refer to para 14-9 for rear hub and

drum assembly removal.

b .

Front Hub and Brake Drum.

(1) Disassembly .

Soldier s

1. Put drum (1) on top of two wood blocks (2) as shown.

A and B

Soldier A

2. Using 9/16-inch wrench, unscrew and take off ten nuts (3) ,

ten washers (4), and inspection cover (5) .

3. Using brass hammer, tap hub assembly (6) out of drum (1).

GO TO FRAME 2

14-20