TM-9-2320-209-20-3-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4
MAY 1981
TM-9-2320-209-20-3-2 - Page 431 of 552
TM 9-2320-209-20-3- 2
16-5. PINTLE HOOK REMOVAL AND REPLACEMENT .
TOOLS :
8-inch slip joint plier s
Pryba r
2 3/16-inch socket wrenc h
SUPPLIES :
Non e
PERSONNEL: On e
EQUIPMENT CONDITION: Truck parked, engine off, handbrake set .
a .
Removal .
FRAME 1
1 .
Using pliers, take out and throw away cotter pin (1) .
2 .
Put prybar (2) through pintle hook (3) to keep pintle hook from turning .
Hold prybar .
3 .
Using 2 3/16-inch wrench, unscrew and take off nut (4). Take off washe r
(5). Take out prybar (2) .
4 .
Pry pintle hook (3) out of bracket (6) .
END OF TAS K
16-1 0
Back to Top
