TM-9-2320-209-20-3-2
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; TROUBLESHOOTING; ORGANIZATIONAL LEVEL; VOLUME 3 OF 3; PART 2 OF 4
MAY 1981
TM-9-2320-209-20-3-2 - Page 440 of 552
TM 9-2320-209-20-3- 2
c .
Replacement .
FRAME 1
1 .
2 .
3 .
Put screw (1) through truck frame from inside. Put spare wheel carrier (2 )
on screw and start nut (3) .
Put three screws (4) through truck frame and spare wheel carrier (2). Star t
three nuts (5) on screws .
Using wrench, hold four screws (1 and 4) .
Using wrench, tighten four nut s
(3 and 5) .
NOT E
Follow-on Maintenance Action Required :
1. Replace air reservoir .
(a )
(b )
(c )
(d )
(e )
2. Pu t
On trucks M275A1 and M275A2, refer to para 13-26 .
On truck M35A1, refer to para 13-30 .
On truck M764, refer to para 13-29 .
On trucks M35A2C, M50A2, M109A3, M185A3 ,
and M765A2, refer to para 13-28 .
On trucks M49A1C and M49A2C, refer to para 13-27 .
spare wheel in carrier .
Refer to TM 9-2320-209-10 .
END OF TAS K
16-1 9
Back to Top
