TM 9-2320-209-20-3- 2
16-8. SPARE WHEEL CARRIER REPAIR (ALL TRUCKS EXCEPT TRUCK M342A2) .
TOOLS :
7/16-inch wrenc h
Plier s
Leather glove s
SUPPLIES :
Non e
PERSONNEL: On e
EQUIPMENT CONDITION :
Truck parked, engine off, handbrake set .
NOT E
Repair of spare wheel carrier is limited to replace -
ment of damaged parts .
a .
Preliminary Procedure .
Remove spare wheel carrier from truck. Refer t o
para 16-7 .
b .
Disassembly .
FRAME 1
1 .
Turn pick-up member (1) with cable (2) attached so nuts (3) are facing up .
2 .
Using 7/16-inch wrench , unscrew and take off four nuts (3), four lockwasher s
(4), and two U-bolts (5) .
WARNIN G
Always wear leather gloves when handling cable. Do no t
let cable run through hands. Broken or rusty wires ca n
cause serious injury to personnel .
3 .
Pull ends of cable (2) out of holes in pick-up member (1) .
GO TO FRAME 2
16-2 0